http://stripersandanglers.com/Forum/...id=19258&stc=1
lip bender/shaper,I made this from a 7 inch long piece of aluminum barstock that's 3/4x1 inch then cut the slots with a bandsaw.
works perfectly.
Printable View
http://stripersandanglers.com/Forum/...id=19258&stc=1
lip bender/shaper,I made this from a 7 inch long piece of aluminum barstock that's 3/4x1 inch then cut the slots with a bandsaw.
works perfectly.
awesome thanks for sharing!
Nice!