the business of plug and lure making

It seems it's getting harder for US manufacturers to make a profit on plug building, according to this article. More stuff is going overseas for manufacture.
Does anyone ever think this will be an issue in the custom plug market? I hope not. :scared:





Background

The way to a fish's stomach is through his eyeballs, and fishing lures are objects that resemble any of the naturally occurring foods that fish might find attractive. The purpose of the lure is to use movement, color, and vibration to grab the fish's attention and cause him to bite the hook. Lures also seem to have the purpose of attracting the fishermen's attention. Sport fishing is now a huge business, with over $620 million spent on fishing lures in 1991.


Plugs encompass a wide variety of lures. Originally, a plug was a piece of wood or cork shaped like a minnow with hooks on the belly and tail. Now the term includes all wood or plastic objects that are shaped like minnows, other baitfish, and other prey ranging from crayfish and salamanders to small rodents. Plugs can be less than I in (2.54 cm) long and up to 8 in (20.32 cm) long.

Poppers, also called topwater plugs, float on the water so they resemble frogs or surface-splashing baitfish. Plugs called floater-diver plugs may have several sets of treble hooks on their undersides as well as small metal or plastic scoops, termed lips, near the line end of the lure. This plug floats on the water surface until the fisherman begins to reel in the lure, then it dives below the water surface in imitation of the motion of a minnow. The lip causes the diving action. A crankbait also has a lip that causes it to dive when retrieved, but it has a wider body and dives deeper (up to 20 ft [6.1 m]) with a wobbling motion like the wriggle of a baitfish. Jerkbaits or stickbaits float but don't have any motion-causing devices like other plugs. The fisherman has to manipulate the rod tip to make these plugs life-like.

Jigs seem too simple to be true. They are weighted hooks with a lead head right behind the hook's eye. The heads and hooks come in many sizes, weights, and shapes with skirts mounted immediately behind the heads to camouflage the business end of the hook. For jigs (also called leadheads) to be effective, they need to dance on the stream bottom like minnows or crawdads, and the fisherman has to apply the right motion to the rod. This action, called jigging, gives them their name.

Jigs are often fished with so-called "sweeteners" that are either live bait or plastic lures.

Plastic lures are imitations of worms, bait fish, bottom-dwellers, and even snakes and amphibians. They are molded of soft plastic, often in lurid colors, although blacks and blues seem to be preferred by fish. Again, the motion of the lure and its effectiveness depend on the dramatics of the angler.


History

By the 1830s and 1840s in both England and America, the making of fishing tackle began to change from the monopoly of the individual craftsmen to commercial manufacturing ventures. From the early 1900s, the firm of Heddon and Pflueger in Michigan led the production of commercially made lures. These lures were often designed from proven lures that were simply pounded out of old kitchen spoons or whittled from pieces of wood.

Rods and reels were handmade by jewelers and watchmakers from the early 1800s. This craft experienced many technical improvements as rod and reel production became commercial throughout the 1870s and 1880s. Advances in fishing line waited until after World War II when braided nylon followed by monofilament line improved the success rate in all types of fishing. Aided by the availability of more leisure time, fishing exploded as a hobby and sport.


Raw Materials

Materials for the manufacture of fishing lures include metal, wood, cork, and plastic, depending on the type of lure. Most lure-makers, whether commercial manufacturers or amateurs do not make the individual components themselves except for poured lead pieces and some molded plastic.

Instead, specialty suppliers make the parts for manufacturers and hobbyists to assemble. Metal parts include hooks, wire, beads, blades, ball bearings, rings, loops, and spacers. Kinds of metal used are stainless steel or titanium, lead, and some brass. Design
While designs of lures fall into some broad categories, as described above, they can also be highly individual.


The Manufacturing Process

The manufacturing processes for two kinds of lures are detailed below. They are the "pulsator spinnerbait," a product of Nichols Lures Incorporated (one of few lure manufacturers remaining in the United States), and a simple jig. These are two of the most popular lures in use. The spinnerbait originated as a safety pin, and it can be fished on the surface, at depth, at speed, or on the bottoms of streams.

Making a spinnerbait

• 1 Production of the spinnerbait begins with an "R"-bend wire or twist wire. It looks like a hairpin or bobbypin with a hook at the end of one leg and a dogleg bend in the other to form an overall shape that looks something like an "R" at the top. A twist wire is similar except that the top of the bobbypin is twisted around to form an eyelet shape. The wire is connected to the hook during construction of the lead head. The wire and a hook are linked at the hook eye and placed in a hinged mold. The mold has special channels to hold the wire that emerges from one end of the mold and the hook that has its bend protruding from the other side. The mold is sized to suit the wire and the hook. At the join between the wire and hook, the mold has a small cavity that will shape the head. The mold is closed and held by an insulated handle at melted lead is poured into a gated channel at the top of the mold. Mass-producers of lures have centrifugal molds in which a number of lures can be made at once, and the centrifugal action swirls the soft lead into all the nooks of the mold cavities. In the hand-molding process, molded heads are made individually.
• 2 When the lead has hardened and cooled, the head is finished by hand painting or spraying it, attaching prefabricated stick-on eyes, and finishing the heads with a clear coating that protects them. Usually, epoxy or polyurethane are applied.
• 3 At the end of the other leg of the lure, a flat metal piece called a blade or spinner is attached to the eye of wire leg. Several other connectors go between the blade and the wire, and the number and selection of pieces can vary considerably. For this example, a ball bearing, small shaft, and split ring are attached to the loop in the wire and crimped down. The blades also have their own personalities; the Colorado is round, the Indiana is tear-drop-shaped, and the willow looks like an elongated willow leaf. The action of the water against the blade causes it to spin in the water and flash in the light. Spinners are die-cut from stainless steel or titanium (for light weight), and sometimes they are painted to add visual interest for the fish. Two of the most popular varieties of spinnerbaits are the double willow or the tandem. Both begin with a wire that has a longer blade end. The double willow has two willow blades. The first one is hung from a cleavis, a horseshoe-shaped device with two eyes that is threaded onto the wire. Beads, a shaft, and a split ring are connected to the wire end, and the second willow blade is added to the ring. The tandem spinnerbait is assembled similarly, except the front blade is a Colorado, and the second spinner is a willow. Again, the combination of beads and connectors can vary depending on the manufacturer's design.
• 4 The hook on the other leg of the wire is still exposed. To finish the spinnerbait, a skirt-keeper of plastic, rubber, or vinyl is slipped over the hook. The skirt-keeper looks like a piece of tubing except it may have a tiny hook-like extension or a small collar that will keep the skirt from sliding around on the hook. The skirt itself is also plastic, rubber, or vinyl that has die-cut slender bands or threads that wave in the water. Skirts come in slip-on varieties or can be http://www.madehow.com/images/hpm_00..._0_img0068.jpg Materials used to manufacture fishing lures include metal, wood, cork, and plastic, depending on the type of lure. Most lure-makers, whether commercial manufacturers or amateurs, do not make the individual components themselves except for poured lead pieces and some molded plastic. Lures fall into several broad categories, each with specific characteristics that catch the fish's attention. They include spoons, spinners, spinnerbaits, plugs, jigs, and plastic lures. The spinnerbait and jig are the most popular designs.
  
  tied on. They are also available in many colors, sizes, and varieties.

Making a jig

• 5 The jig is also a lead head. A hook is placed in a lead mold; this mold is different because the eye of the hook will extend through the lead head. The lead is poured, cooled, and removed from the mold.
• 6 Like the spinnerbait head, the jig's head is painted and finished. A fiber weed guard is placed next to the head to prevent the jig from tangling in weeds or brush. A slip-on collar is fitted on the hook between the head and the bend in the hook, and a rattle is attached. Rattles, again, come in many sizes and forms, and their purpose is to imitate the sound of a crayfish or crawdad under the water.
• 7 A skirt-keeper and skirt are fastened on the hook. The jig itself is finished, but the jig can also be used as the hook end on a spinner rig to make a jig-spinner combination.

Quality Control

Quality control is important to the manufacturer in producing a consistently high-quality product that has been proven in the field. Reputation is a significant selling point in this competitive business. Components are chosen with care.


The Future
Lures have a sparkling future, thanks to the growth in popularity of the sport of fishing, which shows no signs of slowing down. The computer has ventured into lure design, and some of the latest innovations include scent-bearing lures, laser-honed hooks, and exterior finishes that are photographically imprinted and amazingly realistic.

The future for lure manufacturers in the United States is not quite so bright. Although lures are mass-produced, the work still involves hand crafting and assembly.

Manufacturers cannot pay laborers the mandated hourly rates and still profit, so much of the work has relocated to Central America, Southeast Asia, Taiwan, Haiti, and Mexico.


Where to Learn More

Books

Livingston, A. D. Luremaking: The Art and Science of Spinnerbaits, Buzzbaits, Jigs, and Other Leadheads Camden, ME: Ragged Mountain Press, 1994.
Mayes, Jim. How to Make and Repair Your Own Fishing Tackle: An Illustrated Step-by-Step Guide for the Fisherman and Hobbyist. New York: Dodd, Mead & Company, 1986.
Toth, Mike. The Complete Idiot's Guide to Fishing Basics. New York: Alpha Books, 1997.
Periodicals

Almy, Gerald. "Golden oldies: 15 tackle-box classics." Sports Afield (February 1997): 106+.
Other

Nichols Lures Inc. http://www.nicholslures.com/ (June 28, 1999).
Ray's Fishing Lures. April 15, 1999. http://www.raysfishing.com/ (June 28, 1999).

—Gillian S. Holmes

Here is an interesting response to that. A lot of the more well-known builders have passed on. IMO ome of the newer guys are great, but many don't care about quality. I wonder where it will all end?


Economy of High Priced Plugs Publication: The East Hampton Press & The Southampton Press
Mar 24, 09
Michael Wright 27east

The economic boom of the last 15 years fueled more than an overzealous expansion of the housing market: on a much smaller scale it sparked a revival of the art of hand crafting wooden surf plugs. And now, as the economy slumps, it may bring the curtain down on a shining period in surf fishing history.

With striped bass once again swarming the beaches and a new generation of fishermen flush with the fruits of a roaring economy, demand for the prized toys of the sport, finely crafted plugs in customized colors, spiked. On Cape Cod, where plug making is as much folk art as utilitarian craft, small plug makers had never really stopped producing lures, but their runs were small. On Long Island it was the reborn Beachmaster Lures in the mid-1990s that first sparked the lust of reenergized bass fishermen for finely crafted surf plugs.

Demand quickly far outpaced the ability of plug maker Bobby Glauda to keep up. In just a few short years, the growing fervor prompted a long line of new makers of custom surf plugs to set up shop. A surf plug renaissance was born.
Not since the heyday of surf fishing in the 1950s and 1960s—when dozens of surf fishermen started crafting tougher versions of the big wooden plugs muskie fishermen had been using for decades in the lakes of the Midwest—has there been so many plug makers producing classic designs, as well as a few innovative new shapes.
The wood used nowadays may not be as heavy and solid feeling as it once was, but the skill and precision of shaping and balancing and the artistic finishes of today’s plugs far outpaces the first shapes crafted by Jerry Ferrone and Arnold Laine and lots of others along the Cape Cod, Rhode Island and Long Island coasts in the postwar years. Even the later plugs produced by the masters—Atom Lures founder Bob Pond, Stan Gibbs, Super Strike founder Don Musso, and the legendary Danny Pichney—can’t compare to the quality of plug making demonstrated today by the likes of Mike Dauphin, Don Guimelli, or the East End’s own John Niedzielski.

When you’ve got a new Al Gag, J-N’Ski, Tattoo’s or Left Hook plug fastened to your leader, you can feel its movement in the water and see Mr. Linesides coming after it with abandon, and yet it almost feels a shame to put such a beautiful piece of craftsmanship in harm’s way. Even the slightly more workhorse-like designs from After Hours and the new Beachmaster are pretty, in a tough-as-nails kind of way.

But top quality wood is expensive these days. High-tech air brushing equipment is expensive. And with demand high and production limited, the price of plugs has skyrocketed. Even the mass produced models have pushed above $15 each, and the going rate for just about any of the custom plugs is at least $20 and often $25 or $26. That flew like a 2-ounce bottle plug when plumbers, electricians and nail bangers were making $200k a year on new housing construction. But those days are over, it seems, and demand for fancy, expensive plugs is bound to tumble since $4 bucktails and $7 Bombers catch more fish anyway. Hopefully the landlubbers in Washington will be able to fish us out of the drink before the slide snuffs out the plug-making flame.

But top quality wood is expensive these days. High-tech air brushing equipment is expensive. And with demand high and production limited, the price of plugs has skyrocketed. Even the mass produced models have pushed above $15 each, and the going rate for just about any of the custom plugs is at least $20 and often $25 or $26. That flew like a 2-ounce bottle plug when plumbers, electricians and nail bangers were making $200k a year on new housing construction. But those days are over, it seems, and demand for fancy, expensive plugs is bound to tumble since $4 bucktails and $7 Bombers catch more fish anyway. Hopefully the landlubbers in Washington will be able to fish us out of the drink before the slide snuffs out the plug-making flame.



Couldn't agree more,wood is good but plastics better as I always say

ITS WHAT ONE LIKES custom plugs are very nice for me its to see if i can did it
and to catch a fish on something you made thats a high for me !!!..:bong2::wheeeee:

It must be the purest high to make something with your own hands, and have it fool a fish, speedy.

plugcrazy... there is nothing like it ... its a great feeling bro

**Some interesting ideas submitted by Storminsteve and Rip-plugger, thanks! :HappyWave:



http://www.youtube.com/watch?v=C-kOY...eature=related
Thanks Steve......









Here's something similar to the original story, sent in by Rip-plugger, thanks-

http://www.wsiltv.com/news/local/Sou...199249781.html
Southern Illinois Business Makes Fishing Lures From Bottle Caps

http://media.wsiltv.com/images/FishingLures.jpg

Tools

• By Nick Hausen
• Story Created: Mar 20, 2013 at 5:34 PM CDT
  Story Updated: Mar 20, 2013 at 7:41 PM CDT
  
  WEST FRANKFORT -- Most of us just throw our bottle caps in the trash, but a local man has started a business that recycles those caps to create a unique product while also providing jobs to the developmentally disabled.
  
  Docks stood empty Wednesday because of the cold weather, but fisherman will fill the docks when the weather is warmer. Some of those fishermen might be using new lures made of bottle caps.
  
  "The bottle caps take up to a hundred years to dissolve in the ground, and I thought what if we could turn these into a useable product that people could actually go out and use and put people to work at the same time," said ABC Lures owner Rick Hubert.
  
  Hubert got the idea when he tried to pick up what he thought was a fishing lure, and instead found a bottle cap. He spent three years developing and testing his product and is ready to take the next step.
  
  "Have it distributed through the internet," explained Hubert, "through retail outlets, through a chain of distribution. So not that we're looking for a big profit on this, what we want to do is create jobs."
  
  When Hubert heard the H-Group was involved in recycling, he thought it was a perfect fit for making the lures.
  
  "This way, it's getting used for something else," said H-Group training specialist Golda Brandon. "It's fun for these guys, and it's giving them a feeling of purpose and accomplishment."
  
  An accomplishment that they made a product that other people will buy and use.
  
  "These guys go fishing and it would be awesome to see them, "Hey that lure, I did that. I made that,'" explained Brandon. "And look at the fish they just caught. It's good."
  
  The lures cost $2, cheaper than most retail lures. Hubert hopes the idea is a win all the way around, from the environment, to the workers, to the fishermen.
  
  Hubert's new company is also turning recycled bottle caps into bracelets and keychains.
  
  If you're interested in donating bottle caps to ABC Lures, email Hubert at rickhubert@yahoo.com or visit one of these locations:
  
  -La Fiesta in Marion, Benton, and West Frankfort
  -Ramsey's at Lake of Egypt
  -American Legion in Marion
  -John Browns on the Square in Marion
  -Double D's in Benton