Results 1 to 4 of 4

Thread: Kayak Cart modification

  1. #1
    Join Date
    May 2013
    Location
    Cherry Hill, NJ
    Posts
    837

    Default Kayak Cart modification

    A few years ago I bought a paddlelogic trailtrekker kayak cart which was fine for my old kayak that was 32" wide. My new Jackson kayak is 37" at the widest but pretty much maintains a wide stance to the stern. My $169.00 kayak cart no longer worked. I contacted the company and asked if they would sell me a longer axle. They said they could for $40. Instead, I went to Home Depot and bought a 36'x1/2" zinc round rod for $6.78 and 2 hitch pins for $.56 each. I drilled a hole on each end for the hitch pin and had some scrap 3/4" pvc to make 2 3" spacers and extended the axle myself. Works like a charm!
    Click image for larger version. 

Name:	20140504_125359.jpg 
Views:	1 
Size:	43.0 KB 
ID:	18260Click image for larger version. 

Name:	20140504_125410.jpg 
Views:	3 
Size:	37.6 KB 
ID:	18261

  2. #2
    Join Date
    Mar 2013
    Location
    Kearny, NJ
    Posts
    1,435

    Default

    Genius idea.

    Needs some bigger wheels to drag that pig through the sand.

  3. #3
    Join Date
    Mar 2008
    Location
    NJ
    Posts
    1,137

    Default

    Very creative. Is that yak a lot heavier than a hobie?

  4. #4
    Join Date
    May 2013
    Location
    Cherry Hill, NJ
    Posts
    837

    Default

    BH- I saw a spec on a pro angler 14 and it was listed at 148lbs. My kayak is listed at 98lbs. The pro angler 14 is 13'8" long and 36" wide, my kayak is 13'2" long and 37" wide. The outback and other more streamline hobies will be lighter.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •